Eaton Magnefix MD4 - Connection of Plastic-Insulated Cables to Protected Panels; Plastic-Insulated Cable with Copper Core up to 3 X 70 MM

Magnefix MD4
991.184 G01 03
67
3.9 Connection of plastic-insulated cables to
Protected panels
3.9.1 Plastic-insulated cable with copper
core up to 3 x 70 mm
2
WARNING
• Always earth the installation.
• Never work on a live or partly live installation.
Required materials
 3 insulating conduits (a)
 1 bag containing greased rubber sleeves (b)
 3 sealing plugs (c)
 3 protection tubes (d)
 18 plastic screws (e)
 3 cable core clamps (universal)
 plastic cable clamps (j)
Cable box for plastic-insulated cable 3 x 70 mm
2
NOTE
• Universal cable core clamps are only suitable
for connecting copper cable cores.
• Terminate the cable cores in accordance with
the cable manufacturer’s instructions.
Universal cable core clamps, Cu, up to 70 mm
2