Eaton Magnefix MD4 - Assembling the Wall Frame; Fixing the Front C Sections; Fixing the C-Sections and Earth Bar to the Frame; Fixing the Branch Earth Bar

Magnefix MD4
28
991.184 G01 03
3.4.3 Assembling the wall frame
1. Fit a horizontal suspension beam (k) to the vertical
posts (a) using the fastening materials.
1
3.4.4 Fixing the front C sections
1. Fit the adjustable distance plates (d) to the
C-sections (c).
2. Fit the triple plastic cable clamp (b) to the C-
section (c).
3. For systems with Protected panels:
Fit the cable support section (r) to the C-section (c).
1..3
3.4.5 Fixing the C-sections and earth bar to
the frame
1. Fit the C-sections (c) to vertical posts (a), with the
spacers (j) between them.
2. Fit the earth bar (f) to the vertical posts (a).
1, 2
3.4.6 Fixing the branch earth bar
1. Fit the branch earth bar (g) to the earth bar (f).
1