Eaton Magnefix MD4 - Connection of Plastic-Insulated Cables with Copper Cores, 3 X 95 MM up to 3 X; MM 2, Concentric Clamps

Magnefix MD4
58
991.184 G01 03
3.8.2 Connection of plastic-insulated cables
with copper cores, 3 x 95 mm
2
up to 3 x
240 mm
2
, concentric clamps
WARNINGG
• Always earth the installation.
• Never work on a live or partly live installation.
Required materials
 3 insulating conduits (a)
 1 bag containing greased rubber sleeves (b)
 3 sealing plugs (c)
 2 protection covers (d)
 1 extension protection cover (e) (optional)
 3 cable core clamps (concentric), each consisting of
 1 connecting piece (1)
 2 washers with hexagon socket head screws (2)
 1 gland (3)
 2 steel cable clamps or
 2 plastic cable clamps
NOTE
• Concentric cable core clamps are only suitable
for connecting copper cable cores.
• Terminate the cable cores and the splice in
accordance with the cable manufacturer’s
instructions.
1A Concentric cable core clamps
Cu 95 to 240 mm
2
For cables with an aluminium core
Eaton cable core clamps are only suitable for connecting
cables with a copper core.
Aluminium cables are to be connected to the Magnefix
copper connection pins using copper/aluminium crimp
cable sockets.
This prevents stress corrosion.
Concentric crimp cable clamps consist of:
 1 cable socket (1);
 1 clamping ring with socket-head screw (2).
1B Crimp cable clamp, Al, up to 240 mm
2
Basically, any type of cable core clamp can be used,
provided it remains within the maximum permitted
dimensions of  40 x 110 mm when crimped.
1C Space available for cable sockets