Need help?Do you have a question about the ECI AS9216 and is the answer not in the manual?
Specifies the target audience for this manual, typically network administrators.
Details the structure and contents of the manual for easy navigation.
Explains the formatting, symbols, and conventions used throughout the manual.
Lists additional documents and resources for further technical information.
Provides contact information to acquire technical documentation from the vendor.
Offers contact details and methods for obtaining technical support and help.
Covers critical safety precautions, including electrical hazards and warnings.
Details safety requirements and compliance with electromagnetic compatibility standards.
Provides a general introduction to the AS9216 device and its key functionalities.
Describes the various ports available on the AS9216 front panel for connectivity.
Explains the device's power supply units, supporting both AC and DC power inputs.
Details the hot-swappable fan module that provides cooling for the AS9216 chassis.
Mentions the reset switch, noting its current unsupported status.
Indicates the location of the device's MAC address label on the chassis.
Describes the function and status indicators of the LEDs located on the front panel.
Introduces the section covering the physical installation of the AS9216 device.
Lists all the items included in the AS9216 package for initial setup.
Provides instructions and precautions for safely unpacking the AS9216 device.
Details the procedure for mounting the AS9216 device into a standard equipment rack.
Explains the importance and steps for properly grounding the AS9216 device.
Guides users on connecting the AS9216 device to AC or DC power sources.
Describes how to establish a console connection to the AS9216 for initial configuration.
Outlines the essential steps for performing the initial configuration of the AS9216.
Explains how to save the AS9216 device's configuration to its file system.
Explains how to interconnect the AS9216 with other network components.
Provides best practices and recommendations for network cabling.
Details the process of connecting fiber optic modules using SFP transceivers.
Describes the connection procedures for 10 Gbps fiber optic links using XFP transceivers.
Specifies the types of Ethernet cables required for various network connections.
Explains how to replace power supply modules without interrupting AS9216 operation.
Details the procedure for replacing the hot-swappable fan module in the AS9216.
Lists the physical dimensions, weight, and form factor of the AS9216 device.
Details the AC and DC power requirements and typical consumption figures.
Specifies the environmental requirements for optimal device operation.
Outlines the management protocols and features supported by the AS9216.
Introduces the Command Line Interface (CLI) as the primary tool for device management.
Explains the methods for connecting to and logging into the device's CLI.
Describes the hierarchical modes within the CLI, such as Operational and Configuration.
Details the process of saving configuration changes made via the CLI.
Lists keyboard shortcuts for efficient navigation and command editing in the CLI.
Explains common messages and errors encountered during CLI operations.
Lists and describes common commands available in the CLI's operational mode.
Details various 'show' commands used to display device status and configuration.
Lists and describes common commands for modifying device settings in the CLI.
Explains remote device access via SSH or Telnet protocols.
Describes how to manage the device using SNMP-based network management applications.
Details the NETCONF protocol for advanced network device configuration and management.
Lists the specific NETCONF functionalities supported by the AS9216 device.
Provides instructions for establishing a NETCONF session with the AS9216.
Illustrates an example of changing OSPF configuration using NETCONF.
Explains the process of downloading and updating the device's software image.
Lists prerequisites and checks required before downloading a software image.
Provides step-by-step instructions for downloading software images via TFTP or FTP.
To Next Page
General