Using the Command Line Interface
(CLI)
AS9216 Installation and
Maintenance Manual
8-2 ECI Telecom Ltd. Proprietary 492006-2306-013-A00
Accessing the CLI
You can access the CLI:
directly, by connecting a PC to the device’s console port
over an IP network, using Telnet or SSH
Once the console port is displayed, type your username and password to access
the CLI.
For more information regarding default usernames and passwords, refer to the
Device Authentication chapter.
Example:
login as: admin
admin@10.3.27.6's password:admin
admin connected from 10.3.71.20 using ssh on AS9216
AS9216#
The default device-name displayed at the prompt is AS9216. Throughout this
guide, we refer to AS9216 as device-name
.
To Next Page
Loading...
General