492006-2306-013-A00 ECI Telecom Ltd. Proprietary 9-1
CLI over Secure Shell (SSH) and
Telnet
After the initial device IP configuration, you can manage the device remotely,
via SSH or Telnet.
SSH
To access the device via SSH protocol, install one of the below supported SSH
clients on your PC:
SSH Communications Security Corp
OpenSSH
PuTTY terminal program
F-Secure SSH
SecureCRT
Other clients that supports SSH version 2
To connect to the device, use the device’s IP address in the SSH client.
9
Setup and Maintenance
To Next Page
Loading...
General