ECI AS9216 - Accessing Device via NETCONF

AS9216 Installation and
Maintenance Manual
Setup and Maintenance
492006-2306-013-A00 ECI Telecom Ltd. Proprietary 9-7
<capability>http://eci.com/ns/systemCmd/1.0</capability>
<capability>http://eci.com/ns/system_mirror/1.0</capability>
<capability>http://eci.com/ns/time_sync/1.0</capability>
<capability>http://eci.com/ns/vlan/1.0</capability>
<capability>http://eci.com/ns/vlan_node/1.0</capability>
</capabilities>
<session-id>4</session-id></hello>]]>]]>
Accessing the Device via NETCONF
To access the device via NETCONF:
1. Open an SSH2 connection to the NETCONF sub-system.
ssh -s -p830 admin@10.4.4.69 netconf
2. Type the device password (default password is admin).
admin@10.4.4.69's password:admin
3. The agent and the manager both send a hello message and and a set of
capabilities are displayed.
<?xml version="1.0" encoding="UTF-8"?>
<hello
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<capabilities>
<capability>urn:ietf:params:netconf:base:1.0</capability>
</capabilities>
</hello>]]>]]>