Eclipse AVN6620 - Route Search

70
2. Set a destination and search for a route
Navigation guidance
• If a destination is already set, touch
to delete the set
destination and set a new one.
• Touch to add a destination.
"Adding a destination" (Page 79)
(Refer to to .)
Set a destination and a route search will automatically start.
• A route search will continue even if switching to other screens.
• The route will not appear if the distance to the destination is too short.
• When a route search is complete, an all-route display (all routes from the present location
to the destination) screen will appear.
Replace
Add to

Route search
If the destination is on a freeway or
in an inaccessible area, the follow-
ing screen will appear. Touch the
item corresponding to the situa-
tion.
• Touch to set the
destination on the highway.
• Touch to set the
destination on another road.
If the destination is inaccessible or
if there is a river, railroad or other
obstruction in its vicinity, the fol-
lowing screen may be displayed.
• Touch to set that point
as the destination.
• Touch to move the
destination.
If a route search is conducted on a freeway or toll road interchange (IC), the
search result route may start from a nearby local road. In such a case, reinitiate a
route search
(Refer to page 100).
Yes
No
No
Yes