Ecom ST - Page 31

ecom-ST 1.0 31
The following settings are available in the Settings / Internal / Values options
menu:
The following settings are available in the Settings / Internal / USB menu:
The following settings are available in the Settings / Internal / COM module
menu:
Parameter
Meaning
Adjustment field
Temperature
Not possible by all instruments
°C or °F
Exc. air
Excess air
Ratio or %
Eff. (C)
Efficiency with or without
condensate gain
ON, OFF
Parameter
Adjustment field
Transfer speed
1200 − 115200 Baud
Protocol
Enhanced = DAS 5
DAS = DAS NT 2
Modbus RTU
Modbus / TCP
---- = none
Parameter
Adjustment field
Transfer speed
1200 − 115200 Baud
Protocol
Enhanced = DAS 5
DAS = DAS NT 2
Modbus RTU
Modbus / TCP
---- = none
HINWEIS
Only one Modbus application can be active, either Modbus RTU via
RS485 or Modbus / TCP via Ethernet.