Front Matter Serinus 51 User manual 1.0
iv
CE Mark Declaration of Conformity
This declaration applies to the Serinus 51 SO
2
analyzers as manufactured by Ecotech Pty. Ltd. of 1492
Ferntree Gully Rd, Knoxfield, VIC, 3180, Australia, and which may be sold in the following
configurations:
To which this declaration relates is in conformity with the following European Union Directives:
Council Directive of 15 December 2004 on the approximation of the laws of Member
States relating to electromagnetic compatibility (2004/108/EC)
The following standard was applied:
EN 61326-1:2006 Electrical Equipment for measurement, control and
laboratory use – EMC Requirements – Part 1: General
requirements.
• Immunity Requirements EN61326-1
IEC-61000-4-2 Electrostatic discharge immunity
IEC-61000-4-3 Radiated RF immunity
IEC-61000-4-4 Electrical fast transient burst immunity
IEC-61000-4-5 Surge immunity
IEC-61000-4-6 Conducted RF Immunity
IEC-61000-4-11 Voltage dips and interruption immunity
• Electromagnetic compatibility EN61326-1
CISPR-11 Radiated RF emission measurements
CISPR-11 Mains Terminal RF emission measurements
IEC-61000-3-3 Mains Terminal voltage fluctuation measurements
IEC-61000-3-2 Power Frequency harmonic measurements
Council Directive of 12 December 2006 on the harmonization of the laws of Member
States relating to electrical equipment designed for use within certain voltage limits
(2006/95/EC)
The following standard was applied:
EN 61010-1:2001 Safety requirements for electrical equipment, for
measurement control and laboratory use – Part 1:
General requirements
• For protection against:
Electric shock or burn
Mechanical HAZARDS
Excessive temperature
Spread of fire from the equipment
Effects of radiation, including laser sources and sonic and ultrasonic
pressure
To Next Page
Loading...
