EDAN iM80 - Blood Temperature Monitoring

Patient Monitor User Manual Monitoring C.O.
- 100 -
Window For C.O. Edit
 Contents displayed in the window:
①
Six curves of the six measurements and C.O. value
②
Average value of C.O.
③
Average value of CI
④
Function button in the edit window
Values of selected measurements can be averaged and stored in the C.O. item in the HEMOD
menu as the basis for Hemodynamic calculations.
17.7 Blood Temperature Monitoring
Blood temperature monitoring can function when C.O. measurement is not taken. The blood
temperature is measured by the thermistor situated in the distal end of the flotation catheter in the
pulmonary artery.
The blood temperature alarm function will not work during the C.O. measurement. When the
measurement ends, the function will automatically resume.
The current blood temperature is displayed in the C.O. parameter area.
①
④ ②
③