EDAN iM80 User Manual

Patient Monitor User Manual Calculation and Titration Table
- 119 -
Chapter 21 Calculation and Titration Table
The monitor provides calculation function and titration table. Calculations are patient data that
are not directly measured but calculated by the monitor.
The monitor can perform drug calculation. Hemodynamic calculation is not described in this
Instructions for Use. To perform one calculation, select Menu > Common Function > Drug
Dose.
NOTE:
The drug calculation function acts only as a calculator. The patient weights in Drug
Calculation menu and in Patient Information menu are independent of each other.
Therefore changing the Weight in Drug Calculation menu will not change the weight in
the Patient Information menu.
21.1 Drug Calculation
21.1.1 Calculation Procedures
1. The drug calculation window is displayed by selecting Menu > Common Function > Drug
Dose.
2. Select the right pull-down box of the Drug option and select the required drug name among
the 15 drugs which are listed as follows. And the drug name of Drug A, Drug B, Drug C,
Drug D and Drug E can be defined by the user.
 Drug A, Drug B, Drug C, Drug D and Drug E
 AMINOPHYLLINE
 DOBUTAMINE
 DOPAMINE
 EPINEPHRINE
 HEPARIN
 ISUPREL
 LIDOCAINE
 NIPRIDE
 NITROGLYCERIN
 PITOCIN
3. The system generates values that can’t be treated the calcaultion results. The user must enter
the correct parameter value based on the doctor’s instruction.
4. Enter the patient’s weight.
5. Enter the correct parameter value.
6. Confirm whether the calculation result is correct.

EDAN iM80 Specifications

General

Brand	EDAN
Model	iM80
Category	Monitor
Language	English