Edgetech 2050-DSS - Figure 4-13: 2050-DSS Starboard Bridle Power and Data Cable Cable-Tie Locations; Table 4-3: 2050-DSS Tow Bridle Removal Tools

4-43
=
REQUIRED TOOLS
Tools:
• 9/16” Crescent or Adjustable Wrench
• 9/16” Crescent, Adjustable Wrench of Socket
Wrench with 9/16” Socket
• Cutting Plyers
• Needle-Nose Plyers
Table 4-3: 2050-DSS Tow Bridle Removal Tools
Instructions:
1. Unfasten or cut the [3] cable ties securing the power and data cable to the starboard bridle arm
and bridle mounting rail.
Figure 4-13: 2050-DSS Starboard Bridle Power and Data Cable Cable-Tie Locations
2. Remove the [2] split rings using needle nose plyers.
3. Unthread the [2] 3/8” hex nuts, [2] 3/8” bolts, [4] 3/8” standard washers, and [2] 3/8” fender flat
washers using the 9/16 Wrenches.
4. Retain all hardware except cable ties. Those should be replaced when reinstalled.
[3] Cable
Ties