Edgetech 8242XS - Figure 4-5: Using a Wrench to Pry the Cage Apart; Figure 4-6: Tapping the Cage Free with a Mallet

SECTION 5: MAINTENANCE 4-4
2. Place a wrench into the gap between the Cages to pry one side of it off, shown in FIGURE 4-5.
Figure 4-5: Using a Wrench to Pry the Cage Apart
3. With a soft mallet, tap the cages free of the End Cap (two 1/2-inch diameter spreader rods are
loose and will fall free of the cage as it is disassembled).
Figure 4-6: Tapping the Cage Free with a Mallet