Edgetech 8242XS - On Instructions; Figure 4-30: Loosen the Retainer and Move It out of the Way; Figure 4-31: Push in the On;Off Actuator; Figure 4-32: Return Retainer and Tighten

4-21
4.5.1.1 On Instructions
1. Loosen Retainer, and move it out of the way, as shown in FIGURE 4-30.
Figure 4-30: Loosen the Retainer and Move It Out of the Way
2. Push On/Off Actuator Plug in. This will turn the On/Off Option ON, as shown in F
IGURE 4-31.
Figure 4-31: Push in the On/Off Actuator
3. Return Retainer to its proper position and tighten it, as shown in F
IGURE 4-32.
Figure 4-32: Return Retainer and Tighten