Adjust the level of zoom from 100% to 400%
using the “Zoom Factor” slide bar and move
the green box to the section of the image you
wish to zoom on. The enlarged/zoomed view
will be displayed in the main window.
Use the drop down menu to adjust the
listening volume level from the network
camera’s built-in microphone.
Use the drop down menu to adjust the output
volume for the network camera’s speaker.
5. Select “Setup” at the top center and use the menu down the left side to
navigate to the network camera’s various settings. Each menu item is
described in the following chapters.
To Next Page
Loading...
