Edimax Print Server - Print Server Network Ability Settings

7.9 Print Server Cfg – Print Server
Network Ability Setting
The Print Server Cfg page allows you to set:
 The Diagnostic Printout, which determines
whether or not a diagnostic printout should be
printed on the printer to which the print server is
connected.
 The TCP/IP Support, which determines whether
or not TCP/IP network printing is supported
 The NetWare Support, which determines
whether or not NetWare network printing is
supported
 The NetBEUI Support, which determines
whether or not NetBEUI network printing is
supported
 The Write button: save the configuration to the
print server.