7.17 AppleTalk Cfg – AppleTalk
Configuration
The AppleTalk Cfg page allows you to configure
the AppleTalk network parameters of this PrintSir.
AppleTalk is a data communication protocol often used
by Macintoshes. The print server can use these
parameters to join the AppleTalk network and share the
printer to other AppleTalk workstations. Only the
printer attached to P1 printer port can be shared to
AppleTalk network workstations.
The page allows you to set:
Printer Type, the type of printer attached to P1
printer port. You can get the printer type from the
manufacturer of the printer.
Zone, the Zone name that the print server want to
join. Only workstations in the same zone can
share the printer. If you want to share the printer
To Next Page
Loading...
