System Contact
, the system Administrator
information of this print server.
System Location
, the System location of this
print server.
8.3.11 System Utilities
You can perform several tasks from this Utilities page,
as described below:
The Software reset: which determines whether or
not to reset the print server.
The Restore to factory default: which determines
whether or not to erase all of the print server’s
setting and restore to the default configuration
the print server had when it was shipped from the
factory.
The Print diagnostic page: which determines
whether or not to print a diagnostic page to a
attached printer connected at either LPT1, LPT2
or LPT3 of the print server. This feature can be
To Next Page
Loading...
