Edimax Print Server - System Setup; Print Server Side; Client Side

10.2 System Setup
10.2.1 Print Server Side
It is needless to do any setting on the print server
side. Make sure the print server has correct IP settings.
If you want to share the printers to Internet users, you
have to set a real IP to the print server. You also have
to make sure that any gateway, router or firewall does
not block IPP protocol if you have these gateway
devices installed in your network.
10.2.2 Client Side
You only need to perform Window’s standard
Add
New Printer
procedure, select “Network Printer”
shown in the screen below and click “Next >”.