Edimax Print Server - System Setup; Print Server Side; Client User Side

9.3 System Setup
9.3.1 Print Server Side
Step1.Execute the Print Server Configuration Utility。
Step2.In the IP Cfg page, configure the IP address.
Step3.In the Mail Print Cfg page ， configure Mail
polling time and MailBox parameters.
Mail Polling Time : Default is 1 minute; Intervals for
print server to check Emails in the MailBox.
Mail Server, Mail Account and Password are
MailBox's Email server's IP address, account, and password
respectively.
Step4. Press "Write" then "Reset" button.
9.3.2 Client User Side
At first, please confirm that the client computer has
installed and setup the TCP/IP protocol correctly.
Email Printing provides three printing methods, the
insructions and installation are described below:
9.3.2.1 Print directly from appclitions by using the “Print to Email
printing driver”
At first, the client user needs to install and setup the
“
Print to Email Printing Driver ” from the CD-ROM
shipped with the print server package. You can deliver the
“Email Printing Driver” to any one who will print email from