Edimax Print Server - Page 129

 NetBEUI Protocol Support , which determines
whether or not the print server support NetBEUI
network protocol.

POST diagnostic printout , which determines
whether or not a diagnostic printout should be
printed to the attached printer.

Save to Print Server button : save the
configuration to the print server.

Type new password , change to new password.

Re-type new password , confirm the new
password.

Change password button : save the new
password to the print server.
The print server will verify your password (it will ignore
the User Name item) when you save the configuration.
Make sure to reset the print server (described in section
8.3.11
System Utilities ) to let the changes take effect.