Add the network port of the print server to the
administrator’s PC.
Now, you have completed the administrator’s setup for
most of the network environment. You can then perform the
“Client Installation” procedure (section 3.4) on all client’s
sides of the network.
If you want to print from this administrator’s PC to the
print server, all you need to do is to perform Windows’
standard “Add Printer” procedure as described below.
Step1. Click “Start” button, choose Setting =>
Printers
Step2. Double click “Add New Printer”
Step3. Select “Local printer” => click “Next”.
To Next Page
Loading...
