28
SPEED Sensor BOLT Installation
BOLT SENSOR - CABLE INSTALL
YAMAHA G2-G19, G22, Drive,
and EZGO “SHORT HUB”:
SHORT AXLE SEE PAGE 29:
>EZGO “SHORT HUB”
2008+ RXV Driver Knuckle
PN#607413 (or similar)
>EZGO MED-TXT 2001-UP
#70673-G03P
>YAM G2-G19 Short Stub
Driver side Knuckle Part#
JN6-F3511-00-00 (or similar)
____________________________
LONG AXLE SEE PAGE 31:
>YAM G22, 2003 - 2007,
YDRA-YDRE 2007-UP
Driver side Knuckle Part#
JUO-F3511-01-00
>YAM YDRAX - YDREX (DRIVE)
2011, Driver side Knuckle Part#
JUO-F3511-10-00
YAM 2003 and up G22,
YDRA and YDRE (Drive)
use a long stub axle shaft.
(Pg 30)
YAM 2002 G2-G19 and
older, and EZGO use a
short stub axle shaft
(Pg 29)
Install Magnet Page
25-27, then select your
hub Install:
To Next Page
Loading...