8. Storage and disposal
8.1 St
orage
Use the following procedure to store the pump:
1. Shut down the pump as described in Shut down on page 36.
2. Disconnect the pump from the electrical supply.
3. Place and secure protecve covers over the inlet and outlet ports.
4. Store the pump in cool, dry condions unl required for use. When required,
prepare and install the pump as described in Installaon on page 25.
8.2 Disposal
Dispose of the pump and any components from it safely in accordance with all local and
naonal safety and environmental requirements.
Parcular care must be taken with components which have been contaminated with
dangerous process substances.
Do not incinerate uoroelastomer seals and O‑rings.
Page 47
A73501880_G - Storage and disposal
To Next Page
Loading...
Need help?
General
