Edwards nXDS15i User Manual

supplied through a suitable external valve and by using the appropriate adaptor,
a
vailable as an accessory. Refer to Spares and accessories on page 48.
Figure 2 Quick start guide (manual control mode)
OPERATION SELECT STATUS SECTION
Apply power
MAINS
PO
WER
The pump will remain o (factory
default).
The POWER INDICATOR will
illuminate.
Electrical supply
connecon on
page 29
Start the pump
START
BUTTON
The pump will accelerate up to full
running speed.*
The RUN INDICATOR will ash while
accelerang.
The RUN INDICATOR will remain on
when the pump reaches full speed.
Start and stop on
page 32
Stop the pump STOP BUTTON
The pump will decelerate and stop
running.
The RUN INDICATOR will ash while
decelerang.
The RUN INDICATOR will go o when
the pump has stopped.
Start and stop on
page 32
Select and
deselect the
standby speed
STANDBY
MODE SELECT
BUTTON
When engaged, the STANDBY
INDICATOR will illuminate and the
pump will run at the standby speed
seng. Factory default is 70% of full
speed.
Standby on page
32
Page 12
A73501880_G - In
troducon

Edwards nXDS15i Specifications

General

Brand	Edwards
Model	nXDS15i
Category	Water Pump
Language	English