Edwards nXDS15i User Manual

9.2.9 Pump-to-controller cable
Use the c
ontrol cable to control the nXDS pump using Turbo Instrument Controller (TIC)
or TIC Turbo Controller, or a (TAG) Turbo and Acve Gauge controller.
Table 24 Pump-to-controller cables
Product descripon
Ordering informaon
1 m cable D39700835
2 m cable D39700836
5 m cable D39700837
9.3 Spares
9.3.1 Tip-seal kit
Used to maintain or restore the performance of the pump. Refer to Service indicator
codes on page 41.
Table 25 Tip ‑ seal kit
Product descripon
Ordering informaon
Tip‑seal kit A73501801
9.3.2 Cooling fan
Used to replace the cooling fan located inside the nXDS fan cowl. Refer to Figure: nXDS
scroll pump on page 11, item 4.
Table 26 Cooling fan
Product descripon
Ordering informaon
Cooling fan A73501707
9.3.3 Gas ballast knob
Replacement gas ballast control knob aached to the gas ballast control. Refer to Figure:
nXDS scroll pump on page 11, item 3.
Table 27 Gas ballast knob
Product descripon
Ordering informaon
Gas ballast control knob A73501059
9.3.4 Silencer spares kit
R
eplacement spares for the nXDS silencer A50597000.
Table 28
Silencer spares kit
Product descripon
Ordering informaon
Silencer spares kit A50597800
Page 52
A73501880_G - Spares and accessories

Edwards nXDS15i Specifications

General

Brand	Edwards
Model	nXDS15i
Category	Water Pump
Language	English