Edwards nXDS15i User Manual

9.3.5 Inlet/exhaust lt
er spares
Replacement elements for the inlet/exhaust lter A50597805.
Table 29 Inlet/exhaust lter spares
Product descripon
Ordering informaon
5 micron element A50597802
1 micron element A50597803
9.3.6 Bearing replacement kit (not eld serviceable)
Used when the pump has reached a long run service interval. Specic training is
required to replace the bearings on nXDS pumps. See Replace the pump bearings
(service indicator) on page 40 for details of our opons for providing this training.
Table 30
Bearing replacement kit
Product descripon
Ordering informaon
Bearing replacement kit A73501802
9.3.7 Exhaust and ballast valve kit
Used when the pump has reached a long run service interval.
Table 31 Exhaust and ballast valve kit
Product descripon
Ordering informaon
Exhaust and ballast valve kit (standard and
R versions)
A73501803
Exhaust and ballast valve kit
(C versions only)
A73501804
Note:
nXDS20i, nXDS20iR and nXDS20iC versions require two ser
vice kits per pump.
Page 53
A73501880_G - Spares and accessories

Edwards nXDS15i Specifications

General

Brand	Edwards
Model	nXDS15i
Category	Water Pump
Language	English