Efka dc 1500 - 7 Control Operation with Control Panel; Operation of the V810 Control Panel; Code Number Input on the V810 Control Panel; Parameter Input at the Operator Level on the V810 Control Panel

EFKA FP220A5911
20
7 Control Operation with Control Panel
7.1 Operation of the V810 Control Panel
7.1.1 Code Number Input on the V810 Control Panel
Example: Technician level CODE number selection on the V810 control panel
TURN POWER OFF
+
TURN POWER ON. First digit blinks ! "
Press the + or – key to select the first digit !
"
Press the >> key !
Second digit blinks ! "
Press the + or – key to select the second digit !
"
Press the >> key twice !
Fourth digit blinks ! "
Press the + or – key to select the fourth digit!
"
If the CODE number is correct, the first
PARAMETER number at the selected level "
is displayed !
7.1.2 Parameter Input at the Operator Level on the V810 Control Panel
Example: CODE number has not been input !
TURN POWER ON ! "
First parameter at the operator level is
displayed. "
Second parameter at the operator level is
displayed. The next or previous parameter "
can be called by pressing the +/- keys.
Parameter value is displayed ! "
Change parameter value by pressing the
+/- keys. "
Parameter value is entered.
Display advances to the next parameter. "
Press the + key several times until the "
desired parameter is displayed !
Parameter value is displayed ! "
Technician Level Code Number => 1907 and Supplier Level Code Number => 3112
P
C – 0 0 0 0
+
-
C – 1 0 0 0
» C – 1 0 0 0
+
- C – 1 9 0 0
» » C – 1 9 0 0
+
- C – 1 9 0 7
E
F – 1 0 0
F P 2 2 0 A
P
F – 0 0 0
+
F – 0 0 1
E
0 0 3
+
X X X
E
F – 0 0 2
+
F – 0 0 9
E
0