EFKA FP220A5911
10
3.1 Special Accessories
Control panel Variocontrol V810 - part no. 5970153
Control panel Variocontrol V820 - part no. 5970154
Reflection light barrier module LSM002 - part no. 6100031
Hall sensor module HSM001 - part no. 6100032
Pulse encoder IPG001 - part no. 6100033
EFKANET interface IF232-2, complete - part no. 7900068
Adapter cord for the connection of the control to interface 232-2 - part no. 1113119
Compiler C200 (see chapter on the following page!) - part no. 1113262
Adapter cord for the connection of sockets B18 each on the SM210 stepping - part no. 1113172
motor control and on the above control (see chapter on the next page but one!)
Actuating solenoid type EM1.. (for e. g. sewing foot lifting, backtacking, etc.) - see specification
“solenoids” for
available models
Fitting piece for position transmitter - part no. 0300019
Knee switch type KN3 (pushbutton) with cord of approx. 950 mm length without plug - part no. 5870013
Adapter cord for the connection to AISIN high-speed seamer AD3XX, AD158, 3310 - part no. 1112815
and overlock machine EK1
Adapter cord for the connection to BROTHER models 737-113, 737-913 - part no. 1112814
Adapter cord for the connection to BROTHER chainstitch machine model FD3 B257 - part no. 1112822
Adapter cord for the connection to BROTHER sewing machines with position sensor - part no. 1113213
incorporated in the handwheel
Adapter cord for the connection to DÜRKOPP ADLER models 210 and 270 - part no. 1112845
Adapter cord for the connection to GLOBAL model CB2803-56 - part no. 1112866
Adapter cord for the connection to JUKI high-speed seamer with index -6 - part no. 1112816
Adapter cord for the connection to JUKI high-speed seamer with index -7 - part no. 1113132
Adapter cord for the connection to JUKI lockstitch machines with position sensor - part no. 1113157
incorporated in the handwheel
Adapter cord for the connection to JUKI high-speed seamer model LU1510-7 - part no. 1113200
Adapter cord for the connection to KANSAI machine model RX 9803 - part no. 1113130
Adapter cord for the connection to PEGASUS models W500/UT, W600/UT/MS - part no. 1112821
with or without stitch condensing
Adapter cord for the connection to PEGASUS backlatch machine - part no. 1113234
Adapter cord for the connection to PEGASUS chainstitch machine MHG-100 - part no. 1113267
Adapter cord for the connection to PFAFF models 563, 953, 1050, 1180 - part no. 1112841
Adapter cord for the connection to RIMOLDI model F27 - part no. 1113096
Adapter cord for the connection to SINGER models 211, 212U, 212UTT and 591 - part no. 1112824
Adapter cord for the connection to UNION SPECIAL lockstitch machine model - part no. 1112823
63900AMZ (as a replacement for the US80A)
Adapter cord for the connection to UNION SPECIAL model 34700 with stitch lock - part no. 1112844
Adapter cord for the connection to UNION SPECIAL models 34000 and 36200 - part no. 1112865
(as a replacement for the US80A)
Adapter cord for the connection to UNION SPECIAL models CS100 and FS100 - part no. 1112905
Adapter cord for the connection to YAMATO VC series chainstitch machines - part no. 1112818
Adapter cord for the connection to YAMATO VG series chainstitch machines - part no. 1113178
Adapter cord for the connection to YAMATO backlatch machine ABT3 - part no. 1112826
Adapter cord for the connection to YAMATO backlatch machines ABT13, ABT17 - part no. 1113205
Extension cable approx. 1000 mm long for commutation transmitter DC15.. - part no. 1113151
Extension cable approx. 1000 mm long for DC15.. line - part no. 1113150
Adapter cord for the connection of both light barrier module and Hall sensor module - part no. 1113229
or EFKANET
Mounting kit for DC1500 on PEGASUS model W600 - part no. 1113125
Mounting kit for DC1500 on PEGASUS Ex/Ext - part no. 1113126
Undertable mounting kit for DC15.. - part no. 1113235
Sewing light transformer - please indicate
line voltage and
sewing light voltage
(6,3V or 12V)
9-contact SubminD male connector - part no. 0504135
9-contact SubminD male connector - part no. 0504136
Half-shell housing for 9-contact SubminD - part no. 0101523
37-pin SubminD male connector, complete - part no. 1112900
Single pins for 37-pin SubminD with strand of 5cm length - part no. 1112899
To Next Page
Loading...