Efka dc 1500 - 7.6 Programming of Seams (TEACH IN)

EFKA FP220A5911
28
7.6.1 Programming after Code Number Input
! Input code number by means of the 0...9 keys.
! Activate programming of seams TEACH IN by means of the 0 key / Display of pattern number.
Select the next pattern number by means of the + key, in case the actual pattern is already programmed.
Continue the programming of seams as described in the next chapter “Programming without Code Number Input”
from item 4.) onwards.
7.6.2 Programming without Code Number Input
! Activate programming of seams TEACH IN by means of the 0 key / Display of pattern number.
Select the next pattern number by means of the + key, in case the actual pattern is already programmed.
0 I
1.) P
KL2370
E2.)
KL2371
4.) E
KL2373
5.) 0
KL2374
2.) P
KL2376
3.) 0
KL2377
4.) E
KL2378
3.)
P
KL2468
1.)
I0
KL2469