Commissioning
7.3 Description of OSD menu
SCD 19102 / SMD 19102
44 Instruction Manual, 10/2011, A5E01588521A-004
Main menu Function Adjustment/range Description
Others
Frequency / phase(only for analog signal)
Frequency (only for RGB
signals)
1638 … 1738
Phase (only for RGB signals) 0 … 255
Setting the frequency and
phase of the input signal
If the vertical lines are still
slightly fuzzy, adjust the
"Frequency/Phase" setting.
Note
We recommend that a
vertical line from the "Pixel
On/Off" test pattern is
displayed.
Video setting (only for video signals)
Saturation
(only SCD 19102 for video
signals)
1 … 255
Default: 128
Adjusting the saturation for
video signals
To Next Page
Loading...
