Need help?Do you have a question about the eldoLED LINEARdrive and is the answer not in the manual?
Describes the intuitive 3-button user interface and menu navigation.
Details the built-in over-temperature protection for the device.
Explains uploading and managing show sequences using PC software.
Highlights the low electromagnetic interference due to design.
Focuses on the self-explanatory spring-cage connectors for various leads.
Discusses heat sink requirements and ambient temperature limits.
Provides instructions on how to safely remove the device cover.
Guides on marking and pre-drilling holes for mounting the device.
Details the process of securely attaching the device to a mounting surface.
Lists required wire sizes and stripping lengths for connections.
Explains how to detach strain reliefs before connecting leads.
General guide on connecting power, network, and LED leads.
Shows wiring diagrams and explains springcage connectors.
Details connecting the 12V-28V DC power supply to VDC connectors.
Instructions for connecting external control devices like potentiometers.
Explains how to connect DMX and LedSync network cables.
Details connecting DALI network cables to DALI in/out connectors.
Guides on connecting LED groups to specific connectors.
Instructions for reattaching strain reliefs after wiring.
Explains the function of the three menu buttons and the display.
Details the specific actions of the M, + and - buttons.
Outlines the initial setup and main configuration steps.
Describes how to select COLR, SHOW, DMX, or DALI modes.
Guides on configuring LED groups and external input devices.
Explains how to set colour for standalone operation.
Details how to select and set show sequences, speed, and intensity.
Covers setting DMX address and network resolution.
Explains how to view assigned DALI network settings.
Describes options for soft-locking or hard-locking settings.
Instructions for regaining full access to menus after soft-locking.
Guides on performing an RGBW test run for functionality checks.
Provides steps for resetting the device to factory defaults.
Details current, power output, and voltage range.
Lists relevant safety and compliance certifications.
Provides physical measurements of the device.
Describes modulation, channel control, and contrast ratio.
Lists operating temperature and humidity limits.
Shows mechanical drawings and dimensions of the device.
Details mounting orientation and screw types.
Explains network inputs, outputs, resolution, and communication.
Covers available standard and custom shows.
Details connectors for the LINEARdrive 180 model.
Details connectors for the LINEARdrive 720 model.
Discusses cooling, heat sink requirements, and overheating protection.
Describes menu buttons, display, modes, and configuration features.
Lists wire size specifications for LINEARdrive 180.
Lists wire size specifications for LINEARdrive 720.
To Next Page
General