Electrolux EWM 3000 - The multi-display; The duration-display

- 12 -
599 51 13-50 EN
DGS-TDS-N 11.2004 C.D. © Electrolux
3.6 The multi-display
3.7 The duration-display
or
3.8 Moisture / loading
- indicates pre-selected start time (up to 19h), adjustable in 1h steps
- after the start time is chosen the start button must be pushed to
activate the pre-selected start time.
- If you press the break button during the pre-selected start time the door
can be opened.
- indicates the additional soaking time
- once programe has started, indicates the estimated duration of
program / remaining duration inminutes
- indicates faults (for example C1)
- update IR - Interface
- without button, only multy display
- Only 8xxxx range with bachground illumination has the display
- If the load is defently recognized (after approx. 10 min.), the rest
moisture is displayed. They are alternating displayed in a 1min. rhytm
in %
- If wool / delicate wash or additional programs are chosen the display is
out of function.
- The load is displayed in 10 % steps.
- Before programstart, it indicates the estimated program time.
The estimated program time can be corrected automatically.
The times of prewash, mainwash, rinse and spinning will be added
and corrected.
- indicates estimated duration of program / remaining duration in
minutes. The duration in minutes can be corrected because of the
Sensorlogic, Fuzzy - Logic and UKS.
- indicates the end of program