- 51 -
599 51 13-50 EN
DGS-TDS-N 11.2004 C.D. © Electrolux
10.1.2 Panel, knobs and buttons
Abb.: 5 Abb.: 6
The panel is locked additionally on the right side (Fig. 5).
Pull the pilot lamp out of its support (Fig. 5).
Now the panel is disassembled and you can remove buttons and knobs depending on your
need (Fig. 5, Fig. 6).
10.1.3 Bellows
The bellows is buttoned at the crimped part of the front side and secured by a plastic tension band.
It is fixed to the tub by a helical worm spring.
- To exchange the bellows refer to the working instructions of chapters 10.1.1 and 10.1.2,
as the front plate of the appliance has to be removed.
- Take off the tension band and remove the bellows from the crimped part. (Fig. 7)
- Turn up the bellows to the inside.
Abb.: 7
To Next Page
Loading...
