Electrolux EWM 3000 - 8 The Pressure Sensor; Function of the Analog Sensor; 9 The Automatic Foot

- 29 -
599 51 13-50 EN
DGS-TDS-N 11.2004 C.D. © Electrolux
8. The pressure sensor
1 Air inlet
2 Membrane
3 Coil
4 Oscillator ( Elektronic )
5 Magnetic ring
6 Spring
7 Screw to adjust
8 Connector
8.1 Function of the analog sensor
1 Over the air inlet the water pressure moves the membrane.
2 The membrane moves the magnetic ring (5) into the coil (3). Then the oscillator puts an
other frequency on the main electronic. The water level is recognized.
9. The automatic foot
The automatic foot is a kind of shock absorber.
The machine stands on three fixed points ( The usal adjustable feet ).
The adjustable range of the automatic foot is about 11 mm.
- It is not necessary to adjust the feet anymore
- The machine allways stands nicely