- 59 -
599 51 13-50 EN
DGS-TDS-N 11.2004 C.D. © Electrolux
10.3.4 Water distributor
The water distributor is screwed with the panel at the front. The cross bar tightens it in the middle of the
appliance. The connection of the inlet hose and the overflow are guided out of the rear side of the
appliance.
- Remove the worktop; instructions 10.1.1
- Disassemble the panel; instructions 10.1.2
- Untighten the valve; instructions 10.3.3
- Unscrew the cross bar
- Now remove the complete water distribution system
Water distributor
Cross bar
Abb.: 25
Valves
To Previous Page
Loading...
