- 15 -
599 51 13-50 EN
DGS-TDS-N 11.2004 C.D. © Electrolux
4. Additional features
4.1 Stand-by operation
Only machines with background illumination have this feature!
1. During the pre - selected start time:
3 min. after the last operation all displays exept the multi display are shut down.
Any kind of operation (press a button) stops the stand - by - modus and starts all
the according displays.
2. After the end of program:
3 min. after the end of program without any operation all displays are shut down exept
the LED "END" or perhaps a displayed fault code.
You can stop this standby like shown in point 1.
Use : Less energy consumption.
The drum light is activated....
.... if the machine is switched on and the door is opened,
.... or the user opens the door
.... or the user presses the door / light button if the machine isn't in the stand-by-modus.
The drum light is switched off ....
.... if the fixed time of 3 min. has run out,
.... or the user closes the door
.... or the machine starts the stand-by-modus.
The halogen lamp is lowered in small brightness steps.
If the drum light is switched on, the user is able to lenghten the fixed illumination time,
when he presses the door / light button.
4.2 Drum light
To Next Page
Loading...
