Electrolux EWM 3000 - Variomatic loosening-up spin; Activate variomatic loosening-up spin; Deactivate variomatic loosening-up spin

- 18 -
599 51 13-50 EN
DGS-TDS-N 11.2004 C.D. © Electrolux
4.4 Variomatic loosening-up spin
4.4.1 Activate variomatic loosening-up spin
Programming before program start:
- Set selection switch to position short spin.
- Keep stain button pressed at least 5 sec.
- To confirm the end LED is flashing for 5 sec.
- While the end LED is flashing, release the stain button.
- When the flashing has stopped, the variomatic loosening-up spin is active.
4.4.2 Deactivate variomatic loosening-up spin
Programming before program start:
- Set selection switch to position short spin.
- Keep stain button pressed at least 5 sec.
- Immediately when pressing the button, the end LED is flashing.
- After 5 sec the flashing stopps and the LED is lit continuously for 5 sec.
- While the end LED is lit continuously, release the stain button.
- After the end LED has stopped lighting, the variomatic loosening-up spin is cancelled.
In order to check whether the loosening-up spin is activated, set the program selection switch
to short spin and press the stain button shortly. When the end LED is flashing,
the loosening-up spin is activated.