Electrolux EWM 3000 - Customer service test program; Start of the customer service test program; Position of rotary knob

- 35 -
599 51 13-50 EN
DGS-TDS-N 11.2004 C.D. © Electrolux
12. Customer service test program
Start of the customer service test program :
With Prewash and Sensitve buttons pressed, set rotary selector knob to  Energy Saving
Position of rotary knob Button Test function
01
Off
Off
21
Energy Saving
Prewash /
Sensitve
å Start of the customer service test programe
 LED - Test
ê Reactivation of the machine
20
Easy Iron
Water channel pre-wash + level indication
19
Refresh
Water channel mainwash + level indication
18
Fashion
Water channel stain + level indication
17
Silk
Water channel softening rinse + level indication
15
Wool 30°C
Water channel mainwash / hotwater+ level indication
14
Wool 40°C
Fault code displayed (Display + programe cycle LED‘s)
13
Delicates 30°C
å Water channel mainwash fN2
 Heating and reversing
ê Circulation pump
12
Delicates 40°C
Pump out
11
Short Spin
Reversing
10
Spin
- Spinning with complete field 600 1/min
- Pump off after FUCS
09
Starching
- Spinning with tapped field 950 1/min and 1550 1/min
- Pump out after FUCS
03
Cotton / Linen,
Easy - Cares
Clear fault file