Electrolux EWM 3000 - Suds cooling; Activate suds cooling; Deactivate suds cooling

- 16 -
599 51 13-50 EN
DGS-TDS-N 11.2004 C.D. © Electrolux
4.2.2 Deactivate suds cooling
Programming before program start:
- Set selection switch to position short spin.
- Keep prewash button pressed at least 5 sec.
- To confirm the main wash LED is flashing for 5 sec.
- While the main wash LED is flashing, release the prewash button.
- When the flashing has stopped, the suds cooling is active.
Programming before program start:
- Set selection switch to position short spin.
- Keep prewash button pressed at least 5 sec.
- Immediately when pressing the button, the main wash LED is flashing.
- After 5 sec the flashing stopps and the LED is lit continuously for 5 sec.
- While the main wash LED is lit continuously, release the prewash button.
- After the main wash LED has stopped lighting, the suds cooling is cancelled.
In order to check whether the suds cooling is activated, set the program selection switch to
short spin and press the prewash button shortly. When the main wash LED is flashing,
the suds cooling is activated.
4.2.1 Activate suds cooling
4.2 Suds cooling