- 58 -
599 51 13-50 EN
DGS-TDS-N 11.2004 C.D. © Electrolux
10.3.2 Disassembly of the main electronic board
- Remove the worktop, instructions 10.1.1
- Mark the plugs and pull them off from the respective component.
- Now you can exchange the main electronic board
Main electronic board
10.3.3 The valves
The valves is screwed to the water distributor.
The connection of the inlet hose is guided out of the rear side of the appliance via a valve adaptor.
- Remove the worktop; instructions 10.1.1
- Mark the plugs and pull them off
- Unscrew the valves
Valve adaptor
Valves
Abb.: 23
Abb.: 24