- 27 -
599 51 13-50 EN
DGS-TDS-N 11.2004 C.D. © Electrolux
5.8 Softening rinse
The automatic softener intake happens at the optimum time of the program (at the last rinse).
- SPMFF (A)
- filling fixed amount of water 5l
- after that filling up to Fuzzy (x) table value
- 2 - Step intake
- 2,5l over the softener chamber
- 1 min mechanic
- 2,5l over the softener chamber
- softening mechanic
As a result we have a maximum of 4 (5) rinse cycles inclusive softening rinse.
6. Cool down
If there is a cool down, then 5l are taken in over the ART - Nozzle.
- Boiled/Colored depending on how the more water switch is programed
(additional it´s depending on the temperature look at more water switch).
- Automatic cool down depending on the chosen temperature > 40°C general with cool
down, < 40°C without cool down.
- Delicate wash and wool general without cool down
Foam detection:
1. foam
detection:
function
spinning 1. rinse extra rinse 2. rinse
3. rinse
priorty
yes
table + 5l
-> fH
yes yes
yes
spinning
spinning
spinning
table
table
To Next Page
Loading...
