36
10.Shipment, storage
10.1. Loading and Handling
Reciprocator(s) is delivered on the desired date with a list of materials. All the materials are packaged
accordingly for them to be tted and xed in the transport so that the risk of shipment damage is reduced.
The following rules are important for handling:
1. The environmental factors have to be considered for the possible negative effects to the Reciprocator while
handling.
2. The reciprocator has to be handled with care.
3. To be able to avoid the risks of accidents, operators should not stay under the handling equipment at any time.
4. Slippage and crashes could end up damaging the reciprocator, be careful while putting it on the ground.
Check these when receiving the product:
1. Is it the ordered equipment or not?
2. Was there any damage on the goods while in transport?
3. If there is any damage observed on the goods, SISTEM TEKNIK has to be notied immediately via mail or phone
call.
To Next Page
Loading...