37
10.3.
Storage
1. All the goods have to be stored well until the installation.
2. For environmental protection, all goods have to be stored in the manner that has been sent. If there has to be
more protection like extra lubrication, it has to be done in a similar manner.
10.3.1. Maintenance during storage
10.3.1.1 Maintenance schedule
No maintenance schedule is necessary.
10.3.1.2 Maintenance works
During long-term storage, periodically perform a visual check for corrosion.
11. Packing, transport
11.1. Introduction
11.1.1 Requirements on personnel carrying out the work
This chapter describes special precautions that must be taken durin internal transport of the product if:
- the customer himself must pack, transport and ship the product, such as to have renovations or
service work carried out by the manufacturer or
- the product must be shipped for disposal (recycling).
All work must be carried out by personnel trained in packing machines.
11.2. Packing material
A) Width and Height
11.2.1 Selection of packing material
Suitably stable wood packing material must be used.
11.2.2 Procedure when packing
11.2.2.1. Case Dimensions
To Next Page
Loading...