3 General
3.1 Information on the Safety Manual
This manual contains important information regarding the handling of the device. For your own safety and op-
erational safety, please observe all safety warnings and instructions.
Precondition for safe operation is the compliance with the specified safety and handling instructions. Moreover,
the existing local accident prevention regulations and the general safety rules at the site of operation have to be
observed.
Please read the operating manual carefully before starting to work with the device! It is part of the product and
should be kept close to the device and accessible for the staff at any time. The illustrations in the manual are for
better demonstration of the facts. They are not necessarily to scale and can slightly differ from the actual design.
3.2 References
/LIMAX33CP-00-MI/ Mounting Instructions for LIMAX33 CP-00 with installation kit LIMAX S-RMS2
https://www.elgo.de/fileadmin/user_upload/pdf/manual/lift/LIMAX33CP-00-MI-E.pdf
/CiA DR303-3/ CiA Draft Recommendation 303, Part 3: Indicator specification; CAN in Automation
/EN81-20/ Safety rules for the construction and installation of lifts
/EN81-21/ Safety rules for the construction and installation of lifts
3.3 Explanation of Symbols
Special notes in this manual are characterized by symbols.
The notes are introduced by signal words which express the magnitude of danger.
Please follow this advice and act carefully in order to avoid accidents and damage and injuries.
Warning notes:
This symbol in connection with the signal word “Danger” indicates an immediate danger for
the life and health of persons. Failure to heed these instructions can result in serious damage
to health and even fatal injury.
This symbol in connection with the word „Warning” means a possibly impending danger for
the life and health of persons. Failure to heed these instructions can result in serious damage
to health and even fatal injury.
CAUTION!
This symbol in connection with the signal word “Caution” indicates a possibly dangerous
situation. Failure to heed these instructions can lead to injuries or damage of property.
Special safety instructions:
This symbol in connection with the signal word “Danger” indicates an immediate danger for
the life and health of persons due to voltage. Failure to heed these instructions can result in
serious damage to health and even fatal injury. The operations may only be carried out by a
professional electrician.
To Next Page
Loading...
Need help?
General
