ELIT EuroMaster AutoEv - Page 88

EuroMaster AutoEV
33
250V
INSULATION
L-PE
1.289
MΩ
1MΩ
Volt:
262 V
0
0
0
H Unlock
0
Figure 6.7.3 Insulation L-PE Measuring.
250V
INSULATION
L-PE
1.300
MΩ
1MΩ
Volt:
262 V
0
H Unlock
0
0
0
Figure 6.7.4 Insulation L-PE Measurement complete.
Button 1 2 3
F1 250V 500V 1000V
F2 L-PE L-N N-PE
F3 1MΩ 10MΩ 100MΩ
F4 - - -
F5 H Unlock H Lock
Table 6.7.1 Insulation F1 – F5 Menu list.
 F1: Menu for setting the output voltage
 F2: Measurement terminal setting menu.
 F3: Pass / Fail judgment resistance value setting menu.
 F5: If this button and the Test button are pressed at the same time, continuous measurement is
performed, and the mode is changed to H Lock. Click the Test button or press F5 to cancel
continuous measurement.