TelevisGo Page 55/68
7.3.1 PARAMETERS
IMPORTANT: A parameter map is not available for all devices.
This function is not available for these devices.
To Read and Write the parameters of individual devices, go to:
Functions Parameters
The following screen opens:
Page last update on: 7.39.34
Expand all Collapse all Cancel filters
LAN Adapter
Interface
ID Protocol
0
Micronet
Address
192.168.0.1
Fieldbus
LanAdapter
Address DescriptionName (short)
02:00 0.02:00 ID 974LXID 974LX
Compact
999
BusAdapterN/A
Address DescriptionName (short)
02:01 0.02:01 ID 974LXIC 974LX
Filter devices
Description
A
B
C
D
E
The following controls will be visible:
• (A) Device filters, to filter by device description.
• (B) View list of network devices grouped by interface.
• (E) Expand/hide devices in an interface.
Devices can be selected using the relative radio button to the left of the address (C).
Only one device can be selected at a time.
The following buttons are presented at the top (F):
•
Expand all: to view the devices of all interfaces in the list.
•
Collapse All: to hide the devices of all interfaces in the list.
•
Cancel Filters: to restore the display of all devices and cancel device filters.
Click
to go to the next page. This screen shows all parameters of the selected device:
SEt Regulation set point °C/°F LSE() HSE() -2.4
diF Tripping differential °C/°F 0.1 30.0 0.3
HSE Maximum value settable for set point °C/°F LSE() 302.0 -1.0
LSE Minimum value settable for set point °C/°F -58.0 HSE() -2.4
OSP Offset on set point °C/°F -30.0 30.0 0.0
Cit Minimum enabling time for compressor output min 0 250 0
CAt Maximum enabling time for compressor output min 0 250 0
dOd Loads shutdown enabling after door micro enabling flag 0 1 0
dAd Enabling delay of digital inputs min 0 255 0
Ont ON time for compressor output with faulty regulation probe min 0 250 10
OFt OFF time for compressor output with faulty regulation probe min 0 250 3
dOn Compressor output enabling delay from request s02500
dOF Compressor output enabling delay from shutdown min 0 250 3
dbi Delay between two consecutive starts of the compressor output min 0 250 0
OdO Delay output enabling from Power On min 0 250 0
dty Type of defrost flag 0 2 0
dit Interval between defrosts h/min/s 0 250 8
dt1 Unit of measurement for defrost intervals flag 0 2 0
dt2 Unit of measurement for defrost duration flag 0 2 1
dCt Defrost interval count mode flag 0 2 1
dOH Defrost cycle enabling delay from request min 0 59 59
Time interval
Address: 0.02:00
Description: ID 974LX
Name:
Group
Label
Description
Checked rows
Unchecked rows
Empty values
Filled values
Valid data
Invalid or missing values
Read/write
Read only
Parameter filters
Legend
Load parameter map
Label Description UM Min Max Default Device Input
Copy from default Copy from deviceDeselect all Read Write Save parameter map Load parameter map PrintSelect all Cancel filters
All
Browse...
A
B
C
D
E
F
G
H
I
To Next Page
Loading...
