TelevisGo Page 59/68
The name, version and date along with other information regarding the current file/driver are provided below each heading in
grey.
The Remove button can be used to remove the relative configuration file/driver.
In box A of the upgrade, the name of the file to be uploaded will appear.
To upload it, click Browse and scroll through the various folders (directories) to find the upgrade file and select it.
Now click Run to run the upgrade.
IMPORTANT: Make a careful note of the file extension which can be used for each kind of upgrade (written in the bot-
tom left-hand corner under box A).
You will also be able to upgrade the license number (it may be necessary to request a new
key if you wish to increase the maximum number of devices or purchase new operating functions).
To do this, go to the following menu:
Computer License Upgrade
Enter the “Current code”, then the “New code” (supplied by Eliwell) in the page that appears and click the “Start upgrade” button.
If the entered code is wrong an error message will be created.
Once the Upgrade procedure has been completed, you must restart the device for the upgrades to become effective. To do this,
go to the following menu:
Computer Restart
then click Restart.
IMPORTANT!: TelevisGo will be disconnected as a result of this procedure.
Re-enter the device address in the browser to reconnect.
To Next Page
Loading...
