Elmo TT-02RX User Manual

29
SETTING
UP
English
3
After connecting the RGB cable, and
connecting the AC adapter to the DC
IN 12V (Power Socket), plug the AC
adapter into the wall socket.
P.30
(The [POWER
] button is illu minated
red.)
4
Press the [POWER ] button on the
operating panel or the remote control.
After the [POWER
] button flashes
blue, [Power On] is illuminated a few
seconds later.)
N o t e
• Do not operate this device while it is flashing.

Elmo TT-02RX Specifications

General

Brand	Elmo
Model	TT-02RX
Category	Document Camera
Language	English